Xcite XBS200-4 Sim Racing Bass Shaker, 200 W 4 Ohm Tactile Transducer

£430.00

Xcite’s flagship 62 mm, 920 N bass shaker for platforms, risers and full-rig installations.

Free UK delivery, usually dispatched within 2 working days. 14-day returns. See delivery and returns.

2 in stock

SKU: SRE-XBS200 Category: Brand:

Description

The Highest Standard of Tactile Feedback

Extreme force. Ultra-slim. Built for professional tactile systems.

The Xcite XBS200 is the foundation for high-power installations, engineered for maximum force and slim integration. With 920 N peak force, ±15 mm excursion, and 16.1 N/W sensitivity, it delivers massive, efficient output with deep infrasonic impact and precise tactile separation across 10 Hz to 1 kHz.

The XBS200 injects controlled energy into your rig without sacrificing detail. Its high-flux neodymium motor ensures ultra-fast transient response, keeping signals clean and distinct even under extreme loads. 100% steel and aluminium construction. Double steel suspension. IP66-rated. Built for demanding environments.

Designed in Germany, shipped by Sim Racing Effects in the UK

Highlights of the Xcite XBS200-4 Bass Shaker

  • Flat Force Frequency Response — Clear differentiation under multi-signal load — no more “signal mush”.
  • 1000W Peak Power (IEC 60268-5) — Engineered for sustained high loads without thermal compression.
  • ±15 mm Xmax — Xtreme displacement for realistic, long-stroke structural movement.
  • 920 N Peak Force — Built to command heavy-duty installations and professional rigs.
  • 21 Hz Resonance Frequency — Extended infrasonic authority for impact you feel in your core.
  • Neodymium Motor + Oversized Coils — Instant, responsive impact with unmatched 16.1 N/W efficiency.
  • Double Steel Suspension — Industrial-grade durability; zero plastic fatigue.
  • Ultra-slim 62 mm Profile — Massive power that fits where other high-output units can’t.
  • IP66-rated — Ready for dust, moisture, and harsh professional environments.
  • High-Grade Aluminium Housing — Functions as a massive heat sink for consistent performance.
  • Minimal-footprint Terminals — Clean installation with zero added height or width.

Ready to Xcite you

The Xcite XBS200 is designed to make the whole rig part of the tactile system. Its large moving mass (2590 g motor assembly) and extreme motor strength allow it to move heavy constructions with absolute precision.

  • Feel the foundation flex: True structural feedback for high-end simulators and VR-Training.
  • Synchronised Impact: Uniform energy distribution across platforms up to 15 m².
  • Subsonic Energy: Massive low-end rumble without distortion or mechanical noise.

This is the Xcite XBS Series at maximum power.

SpiderCore Motor Architecture

Here’s the Xcite advantage: Most transducers stack the suspension on top of the motor, increasing height and reducing maximum displacement. The XBS Series integrates the suspension directly into the motor core. The SpiderCore design makes the XBS up to 45% shorter than industry standards — enabling a truly ultra-slim profile without the typical loss of excursion or “bottoming out” common in flat designs.

Even the terminals are engineered for minimal footprint, adding no unnecessary height or width. Ultra-slim engineering — with full excursion, extreme output, and durability.

Installation Recommendation

  • Secure with 4 high-tensile screws to a rigid frame or platform.
  • Recommended Amp: 100–1000 W @ 4 Ohm. The extreme 16.1 N/W sensitivity ensures massive output even on mid-range amplifiers.
  • Suggested Low-Pass: 100 Hz (Impact focus) up to 150 Hz (Detail focus).

System configuration

  • Sim Racing: The ultimate engine for full rig excitation – mount one beneath the chair installation
  • Home Cinema: 1–2x per heavy seat — 1–4x per large couch or riser.
  • Platform Installation: 1x unit for platforms from 0.5 m² up to 15 m².

Is the XBS200 right for you?

  • You want maximum output in minimal space
  • You want true immersive bass — not just a shake
  • You want full-range tactile feedback — not a single rumble note
  • You care about long-term reliability — only steel and aluminium, no plastic
  • You demand precision — the ultra-light motor responds instantly
  • You need hardware that thrives in harsh environments

If your installation requires uncompromising force and High-Definition tactile feedback in a compact profile, the XBS200 is your foundation engine.

Additional information

Weight 5.2 kg
Dimensions 31 × 29.5 × 9.5 cm
Brand

Xcite

Model

XBS200-4

RMS power

200 W

Impedance

4 Ohm

Manufacturer warranty

5 years

EAN

9504546768468

Share with