Xcite XBS100-4 Sim Racing Bass Shaker, 100 W 4 Ohm Tactile Transducer
Price range: £119.50 through £127.50
Xcite’s 48 mm, 324 N bass shaker — enough force to drive a whole aluminium rig. Buy it on its own, or with our mounting plate, a ready-made 1.5 m audio cable, or both.
Free UK delivery, usually dispatched within 2 working days. 14-day returns. See delivery and returns.
Description
The Ultimate Solution for High-End Tactile Feedback
Xtended lows. Xtreme precision.
With a massive 324 N peak force packed into a 48 mm profile, the Xcite XBS100-4 delivers enough power to excite an entire aluminium rig — while staying compact enough for direct seat or platform integration. Its ultra-low 22 Hz resonance frequency and ±12 mm excursion let it reproduce the full tactile spectrum down to the lowest octave. Where standard shakers often have “dead zones” or muddy peaks, the XBS100-4 provides a flat, structured response — from infrasonic impacts to the finest surface details.
The high-flux neodymium motor gives lightning-fast transient response, keeping multiple signals distinct and controlled — ideal for complex multi-layer sim effects. Thanks to its superior 8.2 N/W force sensitivity, the XBS100-4 stays exceptionally efficient, outperforming heavier transducers even on moderate amplifier power.
Engineered for brutal conditions. 100% steel and aluminium construction. Double steel suspension. IP66-rated.
Designed in Germany, shipped by Sim Racing Effects in the UK
Highlights of the Xcite XBS100-4
- Flat force-frequency response — clear differentiation under multi-signal load, no more “signal mush”
- 500 W long-term (IEC 60268-5) — Xtreme power handling without thermal compression
- ±12 mm Xmax — massive mechanical travel for the lowest octaves
- 324 N peak force — Xtreme power-to-size ratio
- 22 Hz resonance frequency — tuned for deep, immersive bass
- Neodymium motor and oversized coils — instant, responsive impact with superior Newton-per-Watt efficiency
- Double steel suspension — industrial-grade durability with zero plastic
- Ultra-slim 48 mm profile — fits where others can’t
- IP66-rated — ready for dust, moisture, and harsh environments
- High-grade aluminium housing — a massive heat sink for extreme endurance loads
- Minimal-footprint terminals — zero added height or width for the cleanest possible install
- BST-1 / AST-2B-4 compatible — industry-standard mounting diameter for a seamless drop-in upgrade
Optional: 1.5 m Audio Cable
Add the 1.5 m audio cable to wire your bass shaker to the amplifier quickly and cleanly.
- High-quality two-core 2.0 mm² PVC cable
- Rated to 25 A (300 W at 12 V)
- Fitted with crimped ferrules at both ends
- Manufactured and prepared in the UK
Optional: Mounting Plate
Add the mounting plate to position your bass shaker precisely, using its 4 mm, 6 mm, or 8 mm holes.
- Custom-made to suit 3030 or 4040 aluminium frame
- Additional 4 mm holes allow wood-screw fitment to furniture
- Includes 4× M4×16 mm stainless steel screws with pre-applied Accu360 thread-lock
- 3D-printed in the UK by Sim Racing Effects from durable PLA – each plate carries a light layer texture characteristic of the 3D printing process
Spec sheet
Download the Xcite XBS100-4 spec sheet (PDF, 1.1 MB)
Additional information
| Weight | 2.0 kg |
|---|---|
| Dimensions | 21.5 × 20 × 7 cm |
| Option | Shaker only, With mounting plate, With audio cable, With mounting plate and audio cable |
| Brand | Xcite |
| Model | XBS100-4 |
| RMS power | 100 W |
| Impedance | 4 Ohm |
| Manufacturer warranty | 5 years |
| EAN | 9505384588973 |











