Xcite XBS50-4 Sim Racing Bass Shaker, 50 W 4 Ohm Tactile Transducer

Price range: £57.50 through £66.50

Ultra-slim 35 mm Xcite bass shaker for sim rigs and seats. Buy it on its own, or with our 3D-printed mounting plate and a ready-made 1.5 m audio cable.

Free UK delivery, usually dispatched within 2 working days. 14-day returns. See delivery and returns.

SKU: SRE-XBS50-4 Category: Brand:

Description

The New Standard in High-Definition Tactile Feedback

Ultra-slim. Brutally precise. Built for more than just vibration.

The Xcite XBS50-4 delivers the raw impact of a high-performance tactile transducer — in just 35 mm of height. With up to 155 N peak force and ±9 mm controlled excursion, it produces high-resolution tactile feedback for serious sim racing rigs, high-end cinema seating, and ultra-slim installation platforms.

Where conventional ferrite-motor transducers often blur multiple signals into a single vibration, the Xcite XBS Series uses the optimised SpiderCore motor, designed specifically for high-resolution feedback and signal separation. Its ultra-light, high-flux neodymium motor reacts instantly, so complex signals stay distinct and precisely controlled — ideal for music and for layered sim effects such as engine RPM, gear shifts, and kerb strikes, even with smaller amplifiers.

IP66-rated. Double steel suspension. Built for professional performance.

Designed in Germany, shipped by Sim Racing Effects in the UK

Highlights of the Xcite XBS50-4

  • Flat force-frequency response — clear differentiation under multi-signal load
  • 250 W long-term (IEC 60268-5) — high impact, without compression
  • ±9 mm Xmax — your seat doesn’t vibrate, it punches
  • 155 N peak force — don’t let the size fool you, this one hits hard
  • 33 Hz resonance frequency — tuned for deep, physical bass response
  • Neodymium motor and oversized coils — superior Newton-per-Watt efficiency for smaller amplifiers
  • Double steel suspension — industrial-grade durability with zero plastic
  • Ultra-slim 35 mm profile — mounts anywhere, even where others can’t
  • IP66-rated — ready for dust, moisture, and harsh environments
  • High-grade aluminium housing — a massive heat sink for extreme endurance loads
  • Minimal-footprint terminals — zero added height or width for the cleanest possible install

Ready to Xcite You

The human body detects extremely small differences in frequency and amplitude within the tactile range. Most transducers peak within a narrow band and collapse layered signals into a single dominant shake. The XBS50-4 doesn’t.

With a controlled, flat working range across the critical 20–150 Hz band, it keeps multiple effects separated so you feel the full picture:

  • Feel the gear shift cut through the engine growl
  • Detect the precise moment of ABS activation over road texture
  • Experience the difference between small and large kerbs

This is high-definition tactile feedback.

SpiderCore Motor Architecture

Here’s the Xcite advantage. Most transducers stack the suspension on top of the motor, increasing height and reducing maximum displacement. The XBS Series integrates the suspension directly into the motor core. The SpiderCore design makes the XBS up to 45% shorter than industry standards — a truly ultra-slim profile without the usual loss of excursion or the “bottoming out” common in flat designs. Even the terminals are engineered for minimal footprint, adding no unnecessary height or width.

Installation

  • Secure with 4 screws and push wires into the spring terminals
  • Recommended amplifier range: 50-250 W per channel at 4 Ohm — high force-per-Watt sensitivity drives the unit even with smaller amplifiers
  • Suggested low-pass: 100 Hz (impact focus), up to 150 Hz (detail focus)

System configuration guidance

  • Sim racing: 2 per seat (seat base and upper back)
  • Home cinema: 1–2 per seat, 2–4 per couch

Product details — Xcite XBS50-4 Bass Shaker

  • Peak force: 155 N
  • Excursion (Xmax): ±9 mm
  • Long-term power: 250 W (IEC 60268-5)
  • Resonance frequency: 33 Hz
  • Working range: 20–150 Hz
  • Height: 35 mm
  • Impedance: 4 Ohm
  • Ingress protection: IP66
  • Housing: high-grade aluminium with double steel suspension

Optional: 1.5 m Audio Cable

Add the 1.5 m audio cable to wire your bass shaker to the amplifier quickly and cleanly.

  • High-quality two-core 2.0 mm² PVC cable
  • Rated to 25 A (300 W at 12 V)
  • Fitted with crimped ferrules at both ends
  • Manufactured and prepared in the UK

Optional: Mounting Plate

Add the mounting plate to position your bass shaker precisely, using its 4 mm, 6 mm, or 8 mm holes.

  • Custom-made to suit 3030 or 4040 aluminium frame
  • Additional 4 mm holes allow wood-screw fitment to furniture
  • Includes 4× M4×12 mm stainless steel screws with pre-applied Accu360 thread-lock
  • 3D-printed by Sim Racing Effects from durable PLA – note: each plate carries a light layer texture characteristic of the 3D printing process

Spec sheet

Download the Xcite XBS50-4 spec sheet (PDF, 1.0 MB)

Additional information

Weight 0.65 kg
Dimensions 16.5 × 14.5 × 5.5 cm
Option

Shaker only, With mounting plate, With audio cable, With mounting plate and audio cable

Brand

Xcite

Model

XBS50-4

RMS power

50 W

Impedance

4 Ohm

EAN

9501448624779

Share with