Xcite XTB40-8 Sim Racing Bass Shaker, 80 W 8 Ohm Tactile Transducer
Price range: £49.99 through £54.99
Compact 80 W, 8 ohm Xcite bass shaker that resonates just under 30 Hz, where engine rumble, kerbs and gear changes live. Run two from one amplifier channel. Buy it on its own or with a ready-made 1.5 m audio cable.
Free UK delivery, usually dispatched within 2 working days. 14-day returns. See delivery and returns.
Description
The Compact Choice for Deep Tactile Feedback
Sized for seat-back punch and pedal haptics
The XTB40 works by shaking its external magnet – around 300 g of mass. With the voice-coil fixed to your rig, it resonates at just under 30 Hz – the band where most sim racing effects sit: engine rumble, kerb strikes and gear-change thumps. So the XTB40 gives its strongest response exactly where you want it. Above that it carries finer detail such as road texture, and performs up to 1000 Hz to complement audio feedback for an immersive cockpit surround sound.
Why 8 ohm? Wire two XTB40s in parallel and your amplifier sees 4 ohms, the load almost every amplifier is designed for, so a single channel can drive a pair.
You don’t need a big amplifier. In our testing, even a small 25 W amplifier can drive the XTB40 to its full travel, giving you maximum immersion for minimal additional cost.
Its aluminium body and voice coil former offer excellent heat dissipation and durability, ensuring consistent performance even under high power. The double N42 neodymium magnet and 4-Layer voice coil set a new benchmark for sensitivity, and the robust black steel suspension minimises distortion and controls the powerful magnets.
Designed in Germany, shipped by Sim Racing Effects in the UK
Highlights of the Xcite XTB40-8
- Power handling: 80 W RMS continuous (160 W long-term max)
- Impedance: 8 ohm nominal – allows you to connect two shakers in parallel to most amplifiers
- Resonance: approx. 30 Hz, frequency range: 25 Hz – 1000 Hz (actual response depends on mounting surface)
- Travel: ±2.5 mm linear, ±5 mm maximum
- Size: 65 mm diameter × 31 mm tall Weight: 319 g
Ready to Xcite You
The human body detects extremely small differences in frequency and amplitude within the tactile range. The XTB40-8 works hard across the critical 20–150 Hz band, keeping multiple effects separated so you feel a wide range of effects:
- Feel gear shifts cut through the engine growl
- Detect precise tyre slip over road texture
- Experience road bumps and kerbs
This is high-definition tactile feedback.
Installation
- Peel the adhesive back and affix to a clean, flat surface
- Recommended amplifier: 25 – 100 W per channel at 4 Ohm.
- Suggested low-pass: 100 Hz for impacts, or 150 Hz or higher for detail
Fitment guidance
- Sim racing: fit two on the upper seat-back
- Sim racing: brake pedal, throttle pedal and clutch
- Home cinema: panel mount
Optional: 1.5 m Audio Cable
Add the 1.5 m audio cable to wire your bass shaker to the amplifier quickly and cleanly.
- High-quality two-core 2.0 mm² PVC cable
- Rated to 25 A (300 W at 12 V)
- Fitted with crimped ferrules for your amplifier, and push-fit terminals for the shaker.
- Manufactured and prepared in the UK
Spec sheet
Download the Xcite XTB40-8 spec sheet (PDF, 1.3 MB)
Additional information
| Weight | 0.32 kg |
|---|---|
| Dimensions | 6.5 × 6.5 × 3.1 cm |
| Option | Shaker only, With audio cable |
| Brand | Xcite |
| Model | XTB40-8 |
| RMS power | 80 W |
| Impedance | 8 Ohm |
| EAN | 9506185848679 |










